Share: Email | Twitter

ID

VDE-2022-031

Published

2022-08-17 10:00 (CEST)

Last update

2022-08-17 13:49 (CEST)

Vendor(s)

WAGO GmbH & Co. KG

Product(s)

Article No° Product Name Affected Version(s)
752-8303/8000-0002 EC300 <= 03.06.19(18)
750-8100/xxx-xxx PFC 100 <= 03.06.19(18)
750-8101/xxx-xxx PFC 100 <= 03.06.19(18)
750-8102/xxx-xxx PFC 100 <= 03.06.19(18)
750-8202/xxx-xxx PFC 200 <= 03.06.19(18)
750-8203/xxx-xxx PFC 200 <= 03.06.19(18)
750-8204/xxx-xxx PFC 200 <= 03.06.19(18)
750-8206/xxx-xxx PFC 200 <= 03.06.19(18)
750-8207/xxx-xxx PFC 200 <= 03.06.19(18)
750-8210/xxx-xxx PFC 200 <= 03.06.19(18)
750-8211/xxx-xxx PFC 200 <= 03.06.19(18)
750-8212/xxx-xxx PFC 200 <= 03.06.19(18)
750-8213/xxx-xxx PFC 200 <= 03.06.19(18)
750-8214/xxx-xxx PFC 200 <= 03.06.19(18)
750-8215/xxx-xxx PFC 200 <= 03.06.19(18)
750-8216/xxx-xxx PFC 200 <= 03.06.19(18)
750-8217/xxx-xxx PFC 200 <= 03.06.19(18)
762-4x0x/8000-000x TP600 <= 03.06.19(18)
762-5x0x/8000-000x TP600 <= 03.06.19(18)
762-6x0x/8000-000x TP600 <= 03.06.19(18)

Summary

Multiple WAGO product families are prone to multiple vulnerabilities affecting CODESYS control runtime system.

Vulnerabilities



Last Update
15. Februar 2022 09:47
Weakness
Use of a Broken or Risky Cryptographic Algorithm (CWE-327)
Summary

An issue was discovered in 3S-Smart CODESYS V3 products. The application may utilize non-TLS based encryption, which results in user credentials being insufficiently protected during transport. All variants of the following CODESYS V3 products in all versions containing the CmpUserMgr component are affected regardless of the CPU type or operating system: CODESYS Control for BeagleBone, CODESYS Control for emPC-A/iMX6, CODESYS Control for IOT2000, CODESYS Control for Linux, CODESYS Control for PFC100, CODESYS Control for PFC200, CODESYS Control for Raspberry Pi, CODESYS Control RTE V3, CODESYS Control RTE V3 (for Beckhoff CX), CODESYS Control Win V3 (also part of the CODESYS Development System setup), CODESYS V3 Simulation Runtime (part of the CODESYS Development System), CODESYS Control V3 Runtime System Toolkit, CODESYS HMI V3.

Last Update
15. Februar 2022 09:48
Severity
-
Weakness
-
Summary

This vulnerability enables valid user names to be identified.

Last Update
15. Februar 2022 09:46
Severity
-
Weakness
-
Summary

The user password can be changed without having to enter the original password.

Last Update
18. Juli 2022 11:13
Severity
-
Weakness
-
Summary

The hashing procedure used to save passwords is inadequate.

Impact

Please consult the CVE entries for further information.

Solution

We recommend all effected users to update to firmware version 03.07.14(19) or later (see list of affected devices).

Mitigation

CODESYS GmbH recommends the following general defense measures to reduce the risk of exploits:

  • Use controllers and devices only in a protected environment to minimize network exposure and ensure that they are not accessible from outside
  • Use firewalls to protect and separate the control system network from other networks
  • Use VPN (Virtual Private Networks) tunnels if remote access is required
  • Activate and apply user management and password features
  • Use encrypted communication links
  • Limit the access to both development and control system by physical means, operating system features, etc.
  • Protect both development and control system by using up to date virus detecting solutions

 

For further impact information and risk mitigation, please refer to the official CODESYS Advisory Website at https://www.codesys.com/security/security-reports.html

Reported by

Coordination done by CERT@VDE