October 2018
Title
GEOVAP Reliance 4 SCADA/HMI
Published
Oct. 25, 2018, 4:05 p.m.
Summary
This advisory includes mitigations for a cross-site scripting vulnerability in GEOVAP's Reliance 4 SCADA/HMI system.
Title
Sicherheitsupdate: CODESYS Security Advisories 2018-07, 2018-08 und 2018-09
Published
Oct. 24, 2018, 10:20 a.m.
Summary
Please check source url for more information.
Title
GAIN Electronic Co. Ltd SAGA1-L Series
Published
Oct. 23, 2018, 4:05 p.m.
Summary
This advisory includes mitigations for authentication bypass by capture-relay, improper access control, and improper authentication vulnerabilities in GAIN Electronic's SAGA1-L series transmitters.
Title
Telecrane F25 Series
Published
Oct. 23, 2018, 4 p.m.
Summary
This advisory includes mitigations for an authentication bypass by capture-replay vulnerability in the Telecrane F25 Series software.
Title
OMRON CX-Supervisor
Published
Oct. 17, 2018, 2:55 p.m.
Summary
This advisory includes mitigations for improper restriction of operations within the bounds of a memory buffer, out-of-bounds read, use-after-free, and incorrect type conversion or cast vulnerabilities in OMRON's CX-Supervisor software.
Title
NUUO NVRmini2 and NVRsolo
Published
Oct. 11, 2018, 4:10 p.m.
Summary
This advisory includes mitigations for stack-based buffer overflow and leftover debug code vulnerabilities in NUUO's NVRmini2 and NVRsolo network video recorders.
Title
NUUO CMS
Published
Oct. 11, 2018, 4:05 p.m.
Summary
This advisory includes mitigations for use of insufficiently random values, use of obsolete function, incorrect permission assignment for critical resource, and use of hard-coded credentials vulnerabilities in a NUUO's CMS software management platform.
Title
Delta Industrial Automation TPEditor
Published
Oct. 11, 2018, 4 p.m.
Summary
This advisory includes mitigations for out-of-bounds write and stack-based buffer overflow vulnerabilities in the Delta Industrial Automation TPEditor software.
Title
GE iFix
Published
Oct. 9, 2018, 4:30 p.m.
Summary
This advisory includes mitigations for an unsafe ActiveX control marked safe for scripting vulnerability in a Gigasoft component affecting GE’s iFix HMI products.
Title
Siemens ROX II
Published
Oct. 9, 2018, 4:20 p.m.
Summary
This advisory includes mitigations for improper privilege management vulnerabilities in the Siemens ROX II products.
Title
Siemens SIMATIC S7-1200 CPU Family Version 4
Published
Oct. 9, 2018, 4:15 p.m.
Summary
This advisory includes mitigations for a cross-site request forgery vulnerability in the Siemens SIMATIC S7-1200 CPU products.
Title
Siemens SIMATIC S7-1500, SIMATIC S7-1500 Software Controller and SIMATIC ET 200SP Open Controller
Published
Oct. 9, 2018, 4:10 p.m.
Summary
This advisory includes mitigations for a denial of service from improper input validation vulnerability in the Siemens SIMATIC S7-1500, SIMATIC S7-1500 Software Controller and SIMATIC ET 200SP Open Controller software.
Title
Hangzhou Xiongmai Technology Co., Ltd XMeye P2P Cloud Server
Published
Oct. 9, 2018, 4:05 p.m.
Summary
This advisory includes information on the predictable from observable state, hidden functionality, and missing encryption of sensitive data vulnerabilities in the Hangzhou Xiongmai Technology Co., Ltd XMeye P2P Cloud Server.
Title
Fuji Electric Energy Savings Estimator
Published
Oct. 9, 2018, 4 p.m.
Summary
This advisory includes mitigations for an uncontrolled search path element (DLL Hijacking) vulnerability in the Fuji Electric Energy Savings Estimator software.
Title
SSA-546832 (Last Update: 2018-10-09): Vulnerabilities in Medium Voltage SINAMICS Products
Published
Oct. 9, 2018, 2 a.m.
Summary
The latest updates for medium voltage SINAMICS products fix two security vulnerabilities that could allow an attacker to cause a Denial-of-Service condition either via specially crafted PROFINET DCP broadcast packets or by sending specially crafted packets to port 161/udp (SNMP). Precondition for the PROFINET DCP scenario is a direct Layer ...
Title
SSA-346262 (Last Update: 2018-10-09): Denial-of-Service in Industrial Products
Published
Oct. 9, 2018, 2 a.m.
Summary
Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...
Title
SSA-592007 (Last Update: 2018-10-09): Denial-of-Service Vulnerability in Industrial Products
Published
Oct. 9, 2018, 2 a.m.
Summary
Several industrial controllers are affected by a security vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct OSI Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released ...
Title
SSA-268644 (Last Update: 2018-10-09): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products
Published
Oct. 9, 2018, 2 a.m.
Summary
Security researchers published information on vulnerabilities known as Spectre-NG (Variants 3a and 4). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.
Title
SSA-347726 (Last Update: 2018-10-09): Denial-of-Service Vulnerability in SIMATIC S7-1500, SIMATIC S7-1500 Software Controller and SIMATIC ET 200SP Open Controller
Published
Oct. 9, 2018, 2 a.m.
Summary
Versions of SIMATIC S7-1500, SIMATIC S7-1500 Software Controller and SIMATIC ET 200 SP Open Controller are affected by a denial-of-service vulnerability. An attacker with network access to the PLC can cause a Denial-of-Service condition on the network stack.
Title
SSA-348629 (Last Update: 2018-10-09): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software
Published
Oct. 9, 2018, 2 a.m.
Summary
A Denial-of-Service vulnerability has been identified in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC-Software. Siemens has released updates for several affected products and recommends that customers update to the new version. Siemens is preparing further updates and recommends specific countermeasures until patches are available.
Title
SSA-493830 (Last Update: 2018-10-09): Privilege Escalation in ROX II
Published
Oct. 9, 2018, 2 a.m.
Summary
The latest update for ROX II fixes two vulnerabilities. One vulnerability could allow an attacker with a low-privileged user account to execute arbitrary commands. The other vulnerability could allow an attacker with a low-privileged user account to escalate his privileges. Siemens recommends to update to the new version as soon ...
Title
SSA-507847 (Last Update: 2018-10-09): Cross-Site Request Forgery Vulnerability in SIMATIC S7-1200 CPU Family Version 4
Published
Oct. 9, 2018, 2 a.m.
Summary
The latest firmware update for S7-1200 CPU family version 4 fixes a Cross-Site Request Forgery vulnerability. Siemens recommends to update affected devices as soon as possible.
Title
SSA-979106 (Last Update: 2018-10-09): Vulnerabilities in SIMATIC STEP 7 (TIA Portal) and SIMATIC WinCC (TIA Portal)
Published
Oct. 9, 2018, 2 a.m.
Summary
The latest updates for SIMATIC STEP 7 (TIA Portal) and SIMATIC WinCC (TIA Portal) fix two vulnerabilities. These two vulnerabilities could either allow an attacker with local file write access to manipulate files and cause a Denial-of-service-condition, or execute code both on the manipulated installation and on devices that are ...
Title
SSA-254686 (Last Update: 2018-10-09): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products
Published
Oct. 9, 2018, 2 a.m.
Summary
Security researchers published information on vulnerabilities known as Foreshadow and L1 Terminal Fault (L1TF). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Siemens Industrial Products contain processors that are affected by the vulnerabilities.
Title
SSA-597741 (Last Update: 2018-10-09): Vulnerability in iOS App SIMATIC WinCC OA Operator
Published
Oct. 9, 2018, 2 a.m.
Summary
The SIMATIC WinCC OA Operator iOS app is affected by a security vulnerability which could allow an attacker to read unencrypted data from the application’s directory. Precondition for this scenario is that an attacker has physical access to the mobile device.

Last Updates

BOSCH PSIRT
21.09.2022
CODESYS
27.07.2022
SIEMENS CERT
13.09.2022
US CERT
22.09.2022
US CERT (ICS)
27.09.2022

By Source

Archive

2022
2021
2020
2019
2018
2017

Feeds