Bulletins | CERT@VDE

SSA-593272 V1.4 (Last Update: 2022-03-11): SegmentSmack in Interniche IP-Stack based Industrial Devices

Title

SSA-593272 V1.4 (Last Update: 2022-03-11): SegmentSmack in Interniche IP-Stack based Industrial Devices

Published

March 11, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-593272.pdf

Summary

A vulnerability exists in affected products that could allow remote attackers to affect the availability of the devices under certain conditions. The underlying TCP stack can be forced to make very computation expensive calls for every incoming packet which can lead to a Denial-of-Service.

11.03.2022

SSA-256353 V1.1 (Last Update: 2022-03-11): Third-Party Component Vulnerabilities in RUGGEDCOM ROS

Title

SSA-256353 V1.1 (Last Update: 2022-03-11): Third-Party Component Vulnerabilities in RUGGEDCOM ROS

Published

March 11, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-256353.pdf

Summary

Multiple vulnerabilities affect various third-party components of the RUGGEDCOM ROS, and a cross-site scripting exploit. If exploited, an attacker could cause a denial-of-service, act as a man-in-the-middle or retrieval of sensitive information or gain privileged functions. Siemens has released updates for several affected products and recommends to update to the ...

Siemens SIMOTICS CONNECT 400

Title

Siemens SIMOTICS CONNECT 400

Published

March 10, 2022, 5:50 p.m.

URL

https://us-cert.cisa.gov/ics/advisories/icsa-22-069-02

Summary

This advisory contains mitigations for Type Confusion, Improper Validation of Specified Quantity in Input, Wrap or Wraparound, Improper Handling of Inconsistent Structural Elements vulnerabilities in the Siemens SIMOTICS CONNECT 400 connectivity module.

Siemens SINEMA Mendix Forgot Password Appstore

Title

Siemens SINEMA Mendix Forgot Password Appstore

Published

March 10, 2022, 5:40 p.m.

URL

https://us-cert.cisa.gov/ics/advisories/icsa-22-069-04

Summary

This advisory contains mitigations for Improper Access Control, an d Improper Restriction of Excessive Authentication Attempts vulnerabilities in the Siemens SINEMA Mendix Forgot Password Appstore password management module.

https://us-cert.cisa.gov/ics/advisories/icsa-22-069-06

Siemens COMOS

Title

Siemens COMOS

Published

March 10, 2022, 5:30 p.m.

URL

Summary

This advisory contains mitigations for Memory Allocation with Excessive Size Value, Untrusted Pointer Dereference, Type Confusion, Stack-based Buffer Overflow, Out-of-bounds Write, Out-of-bounds Read, Use After Free, Improper Check for Unusual or Exceptional Conditions vulnerabilities in Siemens COM collaborative plan design software.

Siemens Climatix POL909

Title

Siemens Climatix POL909

Published

March 10, 2022, 5:25 p.m.

URL

https://us-cert.cisa.gov/ics/advisories/icsa-22-069-07

Summary

This advisory contains mitigations for Cross-site Scripting, and Improper Access Control vulnerabilities in of Climatix POL909 AWM and AWB web modules.

https://us-cert.cisa.gov/ics/advisories/icsa-22-069-08

Siemens Polarion ALM

Title

Siemens Polarion ALM

Published

March 10, 2022, 5:20 p.m.

URL

Summary

This advisory contains mitigations for a Cross-site Scripting vulnerability in Siemens Siemens Polarion ALM management software.

https://us-cert.cisa.gov/ics/advisories/icsa-22-069-09

Siemens SINEC INS

Title

Siemens SINEC INS

Published

March 10, 2022, 5:15 p.m.

URL

Summary

This advisory contains mitigations for a Using Components with Known Vulnerabilities vulnerability in the Siemens SINECC INS web-based application.

PTC Axeda agent and Axeda Desktop Server

Title

PTC Axeda agent and Axeda Desktop Server

Published

March 8, 2022, 4:10 p.m.

URL

https://us-cert.cisa.gov/ics/advisories/icsa-22-067-01

Summary

This advisory contains mitigations for Use of Hard-coded Credentials, Missing Authentication for Critical Function, Exposure of Sensitive Information to an Unauthorized Actor, Path Traversal, Improper Check or Handling of Exceptional Conditions vulnerabilities in Axeda agent and Axeda Desktop Server, a remote asset connectivity software used as part of a cloud ...

AVEVA System Platform

Title

AVEVA System Platform

Published

March 8, 2022, 4:05 p.m.

URL

https://us-cert.cisa.gov/ics/advisories/icsa-22-067-02

Summary

This advisory contains mitigations for a Cleartext Storage of Sensitive Information in Memory vulnerability in the AVEVA System Platform, a software management product.

Sensormatic PowerManage (Update A)

Title

Sensormatic PowerManage (Update A)

Published

March 8, 2022, 4 p.m.

URL

https://us-cert.cisa.gov/ics/advisories/icsa-22-034-01

Summary

This update advisory is a follow-up to the original advisory titled ICSA-22-034-01 Sensormatic PowerManage that was published February 3, 2022, on the ICS webpage on www.cisa.gov/uscert. This advisory contains mitigations for an Improper Input Validation vulnerability in the Sensormatic PowerManage operating platform.

SSA-661247 V2.6 (Last Update: 2022-03-08): Apache Log4j Vulnerabilities (Log4Shell, CVE-2021-44228, CVE-2021-45046) - Impact to...

Title

SSA-661247 V2.6 (Last Update: 2022-03-08): Apache Log4j Vulnerabilities (Log4Shell, CVE-2021-44228, CVE-2021-45046) - Impact to Siemens Products

Published

March 8, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-661247.pdf

Summary

On 2021-12-09, a vulnerability in Apache Log4j (a logging tool used in many Java-based applications) was disclosed, that could allow remote unauthenticated attackers to execute code on vulnerable systems. The vulnerability is tracked as CVE-2021-44228 and is also known as “Log4Shell”. On 2021-12-14 an additional denial of service vulnerability (CVE-2021-45046) ...

SSA-669737 V1.1 (Last Update: 2022-03-08): Improper Access Control Vulnerability in SICAM TOOLBOX II

Title

SSA-669737 V1.1 (Last Update: 2022-03-08): Improper Access Control Vulnerability in SICAM TOOLBOX II

Published

March 8, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-669737.pdf

Summary

SICAM TOOLBOX II contains a vulnerability that could allow an attacker access through a circumventable access control. Siemens is preparing updates and recommends countermeasures for products where updates are not, or not yet available.

SSA-840188 V1.2 (Last Update: 2022-03-08): Multiple Vulnerabilities in SIMATIC WinCC Affecting Other SIMATIC Software Products

Title

SSA-840188 V1.2 (Last Update: 2022-03-08): Multiple Vulnerabilities in SIMATIC WinCC Affecting Other SIMATIC Software Products

Published

March 8, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-840188.pdf

Summary

Multiple vulnerabilities were found in SIMATIC WinCC that ultimately could allow local or remote attackers to escalate privileges and read, write or delete critical files. Siemens has released updates for several affected products and recommends to update to the latest versions. Siemens is preparing further updates and recommends specific countermeasures ...

SSA-669158 V1.1 (Last Update: 2022-03-08): DNS Client Vulnerabilities in SIMOTICS CONNECT 400

Title

SSA-669158 V1.1 (Last Update: 2022-03-08): DNS Client Vulnerabilities in SIMOTICS CONNECT 400

Published

March 8, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-669158.pdf

Summary

SIMOTICS CONNECT 400 is affected by DNS Client vulnerabilities as initially reported in Siemens Security Advisory SSA-705111 (https://cert-portal.siemens.com/productcert/pdf/ssa-705111.pdf) for the DNS Module in Nucleus RTOS. Siemens has released updates for the SIMOTICS CONNECT 400 and recommends to update to the latest version.

SSA-166747 V1.0: Scene File Parsing Vulnerability in Simcenter STAR-CCM+ Viewer before V2022.1

Title

SSA-166747 V1.0: Scene File Parsing Vulnerability in Simcenter STAR-CCM+ Viewer before V2022.1

Published

March 8, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-166747.pdf

Summary

Siemens Simcenter STAR-CCM+ Viewer is affected by a memory corruption vulnerability that could be triggered when the application reads scene (.sce) files. If a user is tricked to open a malicious file with the affected application, this could lead to a crash, and potentially also to arbitrary code execution or ...

SSA-838121 V1.1 (Last Update: 2022-03-08): Multiple Denial of Service Vulnerabilities in Industrial Products

Title

SSA-838121 V1.1 (Last Update: 2022-03-08): Multiple Denial of Service Vulnerabilities in Industrial Products

Published

March 8, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-838121.pdf

Summary

Affected SIMATIC firmware contains three vulnerabilities that could allow an unauthenticated attacker to perform a denial-of-service attack under certain conditions. Siemens is preparing updates and recommends specific countermeasures for products where updates are not, or not yet available.

SSA-155599 V1.0: File Parsing Vulnerabilities in COMOS

Title

SSA-155599 V1.0: File Parsing Vulnerabilities in COMOS

Published

March 8, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-155599.pdf

Summary

COMOS uses Drawings SDK from Open Design Alliance that is affected by multiple vulnerabilities that could be triggered when the application reads files in DGN, DXF or DWG file formats. If a user is tricked to open a malicious file with the affected application, an attacker could leverage the vulnerability ...

SSA-501073 V1.1 (Last Update: 2022-03-08): Vulnerabilities in Controllers CPU 1518 MFP using Intel CPUs (November 2020)

Title

SSA-501073 V1.1 (Last Update: 2022-03-08): Vulnerabilities in Controllers CPU 1518 MFP using Intel CPUs (November 2020)

Published

March 8, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-501073.pdf

Summary

Intel has published information on vulnerabilities in Intel products in November 2020. This advisory lists the Siemens Controllers that are affected by these vulnerabilities. In this advisory we take a representative CVE from each advisory: “Intel CSME, SPS, TXE, AMT and DAL Advisory” Intel-SA-00391 is represented by CVE-2020-8744 “BIOS Advisory” ...

SSA-534763 V1.6 (Last Update: 2022-03-08): Special Register Buffer Data Sampling (SRBDS) aka Crosstalk in Industrial Products

Title

SSA-534763 V1.6 (Last Update: 2022-03-08): Special Register Buffer Data Sampling (SRBDS) aka Crosstalk in Industrial Products

Published

March 8, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-534763.pdf

Summary

Security researchers published information on a vulnerability known as Crosstalk (INTEL-SA-00320). This vulnerability affects modern Intel processors to a varying degree. Several Siemens Industrial Products contain processors that are affected by the vulnerability. Siemens has released updates for several affected products and recommends to update to the latest versions. Siemens ...

SSA-541018 V1.5 (Last Update: 2022-03-08): Embedded TCP/IP Stack Vulnerabilities (AMNESIA:33) in SENTRON PAC / 3VA Devices (Par...

Title

SSA-541018 V1.5 (Last Update: 2022-03-08): Embedded TCP/IP Stack Vulnerabilities (AMNESIA:33) in SENTRON PAC / 3VA Devices (Part 2)

Published

March 8, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-541018.pdf

Summary

Security researchers discovered and disclosed 33 vulnerabilities in several open-source TCP/IP stacks for embedded devices, also known as “AMNESIA:33” vulnerabilities. This advisory describes the impact of two of these vulnerabilities (CVE-2020-13987, CVE-2020-17437) to Siemens products. Siemens has released updates for several affected products and recommends to update to the latest ...

SSA-462066 V2.7 (Last Update: 2022-03-08): Vulnerability known as TCP SACK PANIC in Industrial Products

Title

SSA-462066 V2.7 (Last Update: 2022-03-08): Vulnerability known as TCP SACK PANIC in Industrial Products

Published

March 8, 2022, 1 a.m.

URL

https://cert-portal.siemens.com/productcert/pdf/ssa-462066.pdf

Summary

Multiple industrial products are affected by a vulnerability in the kernel known as TCP SACK PANIC. The vulnerability could allow a remote attacker to cause a denial of service condition. Siemens has released updates for several affected products and recommends to update to the new versions. Siemens is preparing further ...