Tuesday, 27.02.2018
Title
Siemens SIMATIC Industrial PCs (Update A)
Published
Feb. 27, 2018, 8:20 p.m.
Summary
This updated advisory is a follow-up to the original advisory titled ICSA-18-058-01 Siemens SIMATIC Industrial PCs that was published February 27, 2018, on the NCCIC/ICS-CERT website. This updated advisory contains mitigation details for cryptographic issue vulnerabilities in the Siemens' SIMATIC Industrial PCs.
Title
Siemens SIMATIC Industrial PCs
Published
Feb. 27, 2018, 8:20 p.m.
Summary
This advisory contains mitigation details for cryptographic issue vulnerabilities in the Siemens' SIMATIC Industrial PCs.
Title
Delta Electronics WPLSoft
Published
Feb. 27, 2018, 8:15 p.m.
Summary
This advisory contains mitigation details for stack-based buffer overflow, heap-based buffer overflow, out-of-bounds write vulnerabilities in the Delta Electronics WPLSoft PLC programming software.
Title
Emerson ControlWave Micro Process Automation Controller
Published
Feb. 27, 2018, 8:10 p.m.
Summary
This advisory includes mitigation recommendations for a stack-based buffer overflow vulnerability in the Emerson ControlWave Micro Process Automation Controller.
Title
Medtronic 2090 Carelink Programmer Vulnerabilities
Published
Feb. 27, 2018, 8:05 p.m.
Summary
This medical device advisory contains mitigation details for vulnerabilities in Medtronic’s 2090 CareLink Programmer and its accompanying software deployment network.
Title
Philips Intellispace Portal ISP Vulnerabilities
Published
Feb. 27, 2018, 8 p.m.
Summary
This medical device advisory contains mitigation details for vulnerabilities in the Philips’ IntelliSpace Portal (ISP), an advanced visualization and image analysis system.
Thursday, 22.02.2018
Title
SSA-892715 (Last Update: 2018-02-22): ME, SPS and TXE Vulnerabilities in SIMATIC IPCs
Published
Feb. 22, 2018, 1 a.m.
Summary
Intel has identified vulnerabilities in Intel Management Engine (ME), Intel Server Platform Services (SPS), and Intel Trusted Execution Engine (TXE). As several Siemens Industrial PCs use Intel technology, they are also affected. Siemens has released updates for the affected Industrial PCs.
Title
SSA-856721 (Last Update: 2018-02-22): Vulnerability in RUGGEDCOM Discovery Protocol (RCDP) of Industrial Communication Devices
Published
Feb. 22, 2018, 1 a.m.
Summary
The RUGGEDCOM RCDP protocol is not properly configured after commissioning of RUGGEDCOM ROS based devices and some SCALANCE X switch models and could allow unauthenticated remote users to perform administrative operations. An attacker must be in the same adjacent network and the RCDP daemon must be enabled in order to ...
Title
SSA-701903 (Last Update: 2018-02-22): SMBv1 Vulnerabilities in Ultrasound Products from Siemens Healthineers
Published
Feb. 22, 2018, 1 a.m.
Summary
Select Ultrasound products from Siemens Healthineers are affected by the Microsoft Windows SMBv1 vulnerabilities. The exploitability of the vulnerabilities depends on the actual configuration and deployment environment of each product. Siemens Healthineers provides updates for the affected products, and recommends specific countermeasures until patches can be applied.
Title
SSA-470231 (Last Update: 2018-02-22): TPM Vulnerability in SIMATIC IPCs
Published
Feb. 22, 2018, 1 a.m.
Summary
Several SIMATIC IPCs include a version of Infineon's Trusted Platform Module (TPM) firmware that mishandles RSA key generation. This makes it easier for attackers to conduct cryptographic attacks against the key material. Siemens has released updates for the affected Industrial PCs.
Title
SSA-346262 (Last Update: 2018-02-22): Denial-of-Service in Industrial Products
Published
Feb. 22, 2018, 1 a.m.
Summary
Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...
Title
SSA-127490 (Last Update: 2018-02-22): Vulnerabilities in SIMATIC WinCC Add-Ons
Published
Feb. 22, 2018, 1 a.m.
Summary
Multiple SIMATIC WinCC Add-Ons released in 2015 and earlier include a vulnerable version of Gemalto Sentinel LDK RTE. Gemalto Sentinel LDK RTE is affected by a vulnerability that could allow remote code execution. Siemens recommends to update the affected software component Gemalto Sentinel LDK RTE.
Title
SSA-168644 (Last Update: 2018-02-22): Spectre and Meltdown Vulnerabilities in Industrial Products
Published
Feb. 22, 2018, 1 a.m.
Summary
Security researchers published information on vulnerabilities known as Spectre and Meltdown. These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.
Title
SSA-275839 (Last Update: 2018-02-22): Denial-of-Service Vulnerability in Industrial Products
Published
Feb. 22, 2018, 1 a.m.
Summary
Several industrial products are affected by a vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct Layer 2 access to the affected products. Siemens has released updates for several affected products, is working ...
Tuesday, 20.02.2018
Title
ABB netCADOPS Web Application
Published
Feb. 20, 2018, 4:05 p.m.
Summary
This advisory contains mitigation details for an information exposure vulnerability in the ABB netCADOPS Web Application.
Thursday, 15.02.2018
Title
Nortek Linear eMerge E3 Series
Published
Feb. 15, 2018, 5:02 p.m.
Summary
This advisory contains mitigation details for a command injection vulnerability in the Nortek Linear eMerge E3 Series.
Title
GE D60 Line Distance Relay
Published
Feb. 15, 2018, 4:10 p.m.
Summary
This advisory contains mitigation details for stack-based buffer overflow and improper restriction of operations within the bounds of a memory buffer vulnerabilities in GE’s D60 Line Distance Relay.
Title
Schneider Electric IGSS Mobile
Published
Feb. 15, 2018, 4:05 p.m.
Summary
This advisory contains mitigation details for Improper certificate validation and plaintext storage of a password vulnerabilities in the Schneider Electric IGSS Mobile products.
Title
Schneider Electric StruxureOn Gateway
Published
Feb. 15, 2018, 4 p.m.
Summary
This advisory contains mitigation details for an unrestricted upload of file with dangerous type vulnerability in Schneider Electric's StruxureOn Gateway software management platform.
Tuesday, 13.02.2018
Title
WAGO PFC200 Series
Published
Feb. 13, 2018, 4:05 p.m.
Summary
This advisory contains mitigation details for an improper authentication vulnerability in the WAGO PFC200 Series.
Title
Schneider Electric IGSS SCADA Software
Published
Feb. 13, 2018, 4 p.m.
Summary
This advisory contains mitigation details for a security misconfiguration vulnerability in Schneider Electric's IDSS SCADA software.
Tuesday, 06.02.2018
Title
Vyaire Medical CareFusion Upgrade Utility Vulnerability
Published
Feb. 6, 2018, 4 p.m.
Summary
This medical device advisory contains mitigation details for an uncontrolled search path element vulnerability in Vyaire Medical’s CareFusion Upgrade Utility application.
Monday, 05.02.2018
Title
SSA-824231 (Last Update: 2018-02-05): Unauthenticated Firmware Upload Vulnerability in Desigo PXC
Published
Feb. 5, 2018, 1 a.m.
Summary
The latest update for Desigo PXC devices fixes a vulnerability that could allow unauthenticated remote attackers to upload malicious firmware without prior authentication. Siemens recommends updating to the new version.
Thursday, 01.02.2018
Title
Fuji Electric V-Server VPR
Published
Feb. 1, 2018, 4:05 p.m.
Summary
This advisory contains mitigation details for a stack-based buffer overflow vulnerability in the Fuji Electric V-Server VPR data collection and management service.

Last Updates

BOSCH PSIRT
21.09.2022
CODESYS
27.07.2022
SIEMENS CERT
13.09.2022
US CERT
22.09.2022
US CERT (ICS)
22.09.2022

By Source

Archive

2022
2021
2020
2019
2018
2017

Feeds