January 2019
08.01.2019
SIEMENS CERT
SSA-325546 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module of SWT3000
Title
SSA-325546 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module of SWT3000
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-325546.pdf
Summary
The firmware variant IEC 61850 of the EN100 Ethernet communication module for SWT 3000 is affected by security vulnerabilities which could allow an attacker to conduct a Denial-of-Service attack over the network. Siemens has released updates for several affected products, is working on updates for the remaining affected products, and ...
08.01.2019
SIEMENS CERT
SSA-348629 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Pr...
Title
SSA-348629 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-348629.pdf
Summary
A Denial-of-Service vulnerability has been identified in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC-Software. Siemens has released updates for several affected products and recommends that customers update to the new version. Siemens is preparing further updates and recommends specific countermeasures until patches are available.
08.01.2019
SIEMENS CERT
SSA-592007 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in Industrial Products
Title
SSA-592007 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in Industrial Products
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-592007.pdf
Summary
Several industrial controllers are affected by a security vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct OSI Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released ...
08.01.2019
SIEMENS CERT
SSA-535640 (Last Update: 2019-01-08): Vulnerability in Industrial Products
Title
SSA-535640 (Last Update: 2019-01-08): Vulnerability in Industrial Products
Published
Jan. 8, 2019, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-535640.pdf
Summary
Various industrial products use the Discovery Service of the OPC UA protocol stack by the OPC foundation https://github.com/OPCFoundation/UA-.NETStandard and could therefore be affected by the remote resource consumption attacks (CVE-2017-12069).
December 2018
17.12.2018
SIEMENS CERT
SSA-982399 (Last Update: 2018-12-17): Missing Authentication in TIM 1531 IRC Modules
Title
SSA-982399 (Last Update: 2018-12-17): Missing Authentication in TIM 1531 IRC Modules
Published
Dec. 17, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-982399.pdf
Summary
The latest update for TIM 1531 IRC fixes a vulnerability. The devices was missing proper authentication when connecting on port 102/tcp, although configured. An attacker needs to be able to connect to port 102/tcp of an affected device in order to exploit this vulnerability. The vulnerability could allow an attacker ...
13.12.2018
SIEMENS CERT
SSA-348629 (Last Update: 2018-12-13): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Pr...
Title
SSA-348629 (Last Update: 2018-12-13): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software
Published
Dec. 13, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-348629.pdf
Summary
A Denial-of-Service vulnerability has been identified in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC-Software. Siemens has released updates for several affected products and recommends that customers update to the new version. Siemens is preparing further updates and recommends specific countermeasures until patches are available.
13.12.2018
SIEMENS CERT
SSA-982399 (Last Update: 2018-12-13): Missing Authentication in TIM 1531 IRC Modules
Title
SSA-982399 (Last Update: 2018-12-13): Missing Authentication in TIM 1531 IRC Modules
Published
Dec. 13, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-982399.pdf
Summary
TIM 1531 IRC is affected by a vulnerability. The devices are missing proper authentication when connecting on port 102/tcp, although configured. An attacker needs to be able to connect to port 102/tcp of an affected device in order to exploit this vulnerability. The vulnerability could allow an attacker to perform ...
13.12.2018
SIEMENS CERT
SSA-293562 (Last Update: 2018-12-13): Vulnerabilities in Industrial Products
Title
SSA-293562 (Last Update: 2018-12-13): Vulnerabilities in Industrial Products
Published
Dec. 13, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-293562.pdf
Summary
Several industrial devices are affected by two vulnerabilities that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. The precondition for this scenario is a direct layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released updates ...
13.12.2018
SIEMENS CERT
SSA-181018 (Last Update: 2018-12-13): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SI...
Title
SSA-181018 (Last Update: 2018-12-13): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C
Published
Dec. 13, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-181018.pdf
Summary
SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C are affected by a vulnerability that could allow an unprivileged attacker located in the same local network segment (OSI Layer 2) to gain system privileges by sending a specially crafted DHCP response to a client's DHCP request. Siemens has released ...
11.12.2018
SIEMENS CERT
SSA-181018 (Last Update: 2018-12-11): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SI...
Title
SSA-181018 (Last Update: 2018-12-11): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C
Published
Dec. 11, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-181018.pdf
Summary
SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C are affected by a vulnerability that could allow an unprivileged attacker located in the same local network segment (OSI Layer 2) to gain system privileges by sending a specially crafted DHCP response to a client's DHCP request. Siemens has released ...
11.12.2018
SIEMENS CERT
SSA-348629 (Last Update: 2018-12-11): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Pr...
Title
SSA-348629 (Last Update: 2018-12-11): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software
Published
Dec. 11, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-348629.pdf
Summary
A Denial-of-Service vulnerability has been identified in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC-Software. Siemens has released updates for several affected products and recommends that customers update to the new version. Siemens is preparing further updates and recommends specific countermeasures until patches are available.
11.12.2018
SIEMENS CERT
SSA-674165 (Last Update: 2018-12-11): Vulnerability in McAfee MACC product for SINAMICS PERFECT HARMONY GH180 drives
Title
SSA-674165 (Last Update: 2018-12-11): Vulnerability in McAfee MACC product for SINAMICS PERFECT HARMONY GH180 drives
Published
Dec. 11, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-674165.pdf
Summary
McAfee has issued Security Bulletin SB10250 to address a vulnerabilty in McAfee Application and Change Control (MACC). SINAMICS PERFECT HARMONY GH180 Drives with HMIs produced between November 4th, 2015 and October 9th, 2018, use MACC as part of their software package, if option A30 was part of the order. Siemens ...
11.12.2018
SIEMENS CERT
SSB-439005 (Last Update: 2018-12-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-...
Title
SSB-439005 (Last Update: 2018-12-11): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP
Published
Dec. 11, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssb-439005.pdf
Summary
11.12.2018
SIEMENS CERT
SSA-170881 (Last Update: 2018-12-11): Vulnerabilities in SINUMERIK Controllers
Title
SSA-170881 (Last Update: 2018-12-11): Vulnerabilities in SINUMERIK Controllers
Published
Dec. 11, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-170881.pdf
Summary
The latest updates for SINUMERIK controllers fix multiple security vulnerabilities that could allow an attacker to cause Denial-of-Service conditions, escalate privileges, or to execute code from remote. Siemens has released updates for several affected products, is working on updates for the remaining affected products and recommends specific countermeasures until fixes ...
11.12.2018
SIEMENS CERT
SSA-982399 (Last Update: 2018-12-11): Missing Authentication in TIM 1531 IRC Modules
Title
SSA-982399 (Last Update: 2018-12-11): Missing Authentication in TIM 1531 IRC Modules
Published
Dec. 11, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-982399.pdf
Summary
The latest update for TIM 1531 IRC fixes a vulnerability. The devices was missing proper authentication when connecting on port 102/tcp, although configured. An attacker needs to be able to connect to port 102/tcp of an affected device in order to exploit this vulnerability. The vulnerability could allow an attacker ...
11.12.2018
SIEMENS CERT
SSA-293562 (Last Update: 2018-12-11): Vulnerabilities in Industrial Products
Title
SSA-293562 (Last Update: 2018-12-11): Vulnerabilities in Industrial Products
Published
Dec. 11, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-293562.pdf
Summary
Several industrial devices are affected by two vulnerabilities that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released updates for ...
11.12.2018
SIEMENS CERT
SSA-254686 (Last Update: 2018-12-11): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products
Title
SSA-254686 (Last Update: 2018-12-11): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products
Published
Dec. 11, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-254686.pdf
Summary
Security researchers published information on vulnerabilities known as Foreshadow and L1 Terminal Fault (L1TF). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Siemens Industrial Products contain processors that are affected by the vulnerabilities.
11.12.2018
SIEMENS CERT
SSA-635129 (Last Update: 2018-12-11): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module and SIPROTEC 5 r...
Title
SSA-635129 (Last Update: 2018-12-11): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module and SIPROTEC 5 relays
Published
Dec. 11, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-635129.pdf
Summary
The EN100 Ethernet communication module and SIPROTEC 5 relays are affected by security vulnerabilities which could allow an attacker to conduct a Denial-of-Service attack over the network. Siemens has released updates for several affected products, is working on updates for the remaining affected products, and recommends specific countermeasures until fixes ...
11.12.2018
SIEMENS CERT
SSA-346262 (Last Update: 2018-12-11): Denial-of-Service in Industrial Products
Title
SSA-346262 (Last Update: 2018-12-11): Denial-of-Service in Industrial Products
Published
Dec. 11, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-346262.pdf
Summary
Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...
11.12.2018
SIEMENS CERT
SSA-268644 (Last Update: 2018-12-11): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products
Title
SSA-268644 (Last Update: 2018-12-11): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products
Published
Dec. 11, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-268644.pdf
Summary
Security researchers published information on vulnerabilities known as Spectre-NG (Variants 3a and 4). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.
November 2018
27.11.2018
SIEMENS CERT
SSB-439005 (Last Update: 2018-11-27): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-...
Title
SSB-439005 (Last Update: 2018-11-27): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP
Published
Nov. 27, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssb-439005.pdf
Summary
13.11.2018
SIEMENS CERT
SSA-254686 (Last Update: 2018-11-13): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products
Title
SSA-254686 (Last Update: 2018-11-13): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products
Published
Nov. 13, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-254686.pdf
Summary
Security researchers published information on vulnerabilities known as Foreshadow and L1 Terminal Fault (L1TF). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Siemens Industrial Products contain processors that are affected by the vulnerabilities.
13.11.2018
SIEMENS CERT
SSA-242982 (Last Update: 2018-11-13): Cross-Site Scripting Vulnerability in SCALANCE S
Title
SSA-242982 (Last Update: 2018-11-13): Cross-Site Scripting Vulnerability in SCALANCE S
Published
Nov. 13, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-242982.pdf
Summary
A Cross-Site Scripting (XSS) vulnerability was found in the web server of SCALANCE S firewalls. Siemens provides firmware version V4.0.1.1, which fixes the vulnerability and recommends to update to the newest version.
13.11.2018
SIEMENS CERT
SSA-168644 (Last Update: 2018-11-13): Spectre and Meltdown Vulnerabilities in Industrial Products
Title
SSA-168644 (Last Update: 2018-11-13): Spectre and Meltdown Vulnerabilities in Industrial Products
Published
Nov. 13, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-168644.pdf
Summary
Security researchers published information on vulnerabilities known as Spectre and Meltdown. These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.
13.11.2018
SIEMENS CERT
SSA-113131 (Last Update: 2018-11-13): Denial-of-Service Vulnerabilities in S7-400 CPUs
Title
SSA-113131 (Last Update: 2018-11-13): Denial-of-Service Vulnerabilities in S7-400 CPUs
Published
Nov. 13, 2018, 1 a.m.
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-113131.pdf
Summary
Two vulnerabilities have been identified in the SIMATIC S7-400 CPU family that could allow an attacker to cause a Denial-of-Service condition. In order to exploit the vulnerability, an attacker must have access to the affected devices on port 102/tcp via Ethernet, PROFIBUS or Multi Point Interfaces (MPI). Siemens provides updates ...

Last Updates

BOSCH PSIRT
15.05.2024
SIEMENS CERT
14.05.2024
US CERT
10.05.2024
US CERT (ICS)
16.05.2024

By Source

Archive

2024
2023
2022
2021
2020
2019
2018
2017

Feeds