April 2019
09.04.2019
SIEMENS CERT
SSA-451142 (Last Update: 2019-04-09): Multiple Vulnerabilities in RUGGEDCOM ROX II
Titel
SSA-451142 (Last Update: 2019-04-09): Multiple Vulnerabilities in RUGGEDCOM ROX II
Veröffentlicht
9. April 2019 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-451142.pdf
Text
The latest update for RUGGEDCOM ROX II fixes multiple vulnerabilities in third party component software. The most severe vulnerability could allow an attacker to run arbitrary code on the device. Siemens has released firmware updates for RUGGEDCOM ROX II and recommends that customers update to the new version.
09.04.2019
SIEMENS CERT
SSA-268644 (Last Update: 2019-04-09): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products
Titel
SSA-268644 (Last Update: 2019-04-09): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products
Veröffentlicht
9. April 2019 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-268644.pdf
Text
Security researchers published information on vulnerabilities known as Spectre-NG (Variants 3a and 4). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.
09.04.2019
SIEMENS CERT
SSA-307392 (Last Update: 2019-04-09): Denial-of-Service in OPC UA in Industrial Products
Titel
SSA-307392 (Last Update: 2019-04-09): Denial-of-Service in OPC UA in Industrial Products
Veröffentlicht
9. April 2019 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-307392.pdf
Text
A vulnerability has been identified in the OPC UA server of several industrial products. The vulnerability could cause a Denial-of-Service condition on the service or the device. Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates and ...
09.04.2019
SIEMENS CERT
SSB-439005 (Last Update: 2019-04-09): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-...
Titel
SSB-439005 (Last Update: 2019-04-09): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP
Veröffentlicht
9. April 2019 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssb-439005.pdf
Text
09.04.2019
SIEMENS CERT
SSA-324467 (Last Update: 2019-04-09): OS Command Injection in Spectrum Power 4.7
Titel
SSA-324467 (Last Update: 2019-04-09): OS Command Injection in Spectrum Power 4.7
Veröffentlicht
9. April 2019 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-324467.pdf
Text
Versions of Spectrum Power™ 4, that use the customer specific project enhancement (PE) Web Office Portal (WOP) are affected by a possible OS Command Injection vulnerability. Siemens has released patches for the affected version and recommends to apply specific countermeasures until these patches can be applied.
09.04.2019
SIEMENS CERT
SSA-844562 (Last Update: 2019-04-09): Multiple Vulnerabilities in Licensing Software for WinCC OA
Titel
SSA-844562 (Last Update: 2019-04-09): Multiple Vulnerabilities in Licensing Software for WinCC OA
Veröffentlicht
9. April 2019 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-844562.pdf
Text
Multiple vulnerabilities have been identified in the WibuKey Digital Rights Management (DRM) solution, which affect WinCC OA. Siemens recommends users to apply the updates to WibuKey Digital Rights Management (DRM) provided by WIBU SYSTEMS AG.
09.04.2019
SIEMENS CERT
SSA-141614 (Last Update: 2019-04-09): Denial-of-Service in SIMOCODE pro V EIP
Titel
SSA-141614 (Last Update: 2019-04-09): Denial-of-Service in SIMOCODE pro V EIP
Veröffentlicht
9. April 2019 02:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-141614.pdf
Text
SIMOCODE pro V EIP is affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released an update for SIMOCODE pro V EIP and recommends that customers update to the new version.
März 2019
12.03.2019
SIEMENS CERT
SSA-557804 (Last Update: 2019-03-12): Mirror Port Isolation Vulnerability in SCALANCE X switches
Titel
SSA-557804 (Last Update: 2019-03-12): Mirror Port Isolation Vulnerability in SCALANCE X switches
Veröffentlicht
12. März 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-557804.pdf
Text
A vulnerability was identified in several SCALANCE X switches that could allow an attacker to feed information into a network via the mirror port with the monitor barrier feature enabled. The monitor barrier implementation in various SCALANCE products does allow traffic to be directed back into the mirroring network. This ...
12.03.2019
SIEMENS CERT
SSA-168644 (Last Update: 2019-03-12): Spectre and Meltdown Vulnerabilities in Industrial Products
Titel
SSA-168644 (Last Update: 2019-03-12): Spectre and Meltdown Vulnerabilities in Industrial Products
Veröffentlicht
12. März 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-168644.pdf
Text
Security researchers published information on vulnerabilities known as Spectre and Meltdown. These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.
12.03.2019
SIEMENS CERT
SSA-824231 (Last Update: 2019-03-12): Unauthenticated Firmware Upload Vulnerability in Desigo PX Controllers
Titel
SSA-824231 (Last Update: 2019-03-12): Unauthenticated Firmware Upload Vulnerability in Desigo PX Controllers
Veröffentlicht
12. März 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-824231.pdf
Text
The latest update for Desigo PXC devices fixes a vulnerability that could allow unauthenticated remote attackers to upload malicious firmware without prior authentication. Siemens recommends updating to the new version.
12.03.2019
SIEMENS CERT
SSA-348629 (Last Update: 2019-03-12): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Pr...
Titel
SSA-348629 (Last Update: 2019-03-12): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software
Veröffentlicht
12. März 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-348629.pdf
Text
A Denial-of-Service vulnerability has been identified in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC-Software. Siemens has released updates for several affected products and recommends that customers update to the new version. Siemens is preparing further updates and recommends specific countermeasures until patches are available.
12.03.2019
SIEMENS CERT
SSA-346262 (Last Update: 2019-03-12): Denial-of-Service in Industrial Products
Titel
SSA-346262 (Last Update: 2019-03-12): Denial-of-Service in Industrial Products
Veröffentlicht
12. März 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-346262.pdf
Text
Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...
12.03.2019
SIEMENS CERT
SSA-170881 (Last Update: 2019-03-12): Vulnerabilities in SINUMERIK Controllers
Titel
SSA-170881 (Last Update: 2019-03-12): Vulnerabilities in SINUMERIK Controllers
Veröffentlicht
12. März 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-170881.pdf
Text
The latest updates for SINUMERIK controllers fix multiple security vulnerabilities that could allow an attacker to cause Denial-of-Service conditions, escalate privileges, or to execute code from remote. Siemens has released updates for several affected products, is working on updates for the remaining affected products and recommends specific countermeasures until fixes ...
12.03.2019
SIEMENS CERT
SSB-439005 (Last Update: 2019-03-12): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-...
Titel
SSB-439005 (Last Update: 2019-03-12): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP
Veröffentlicht
12. März 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssb-439005.pdf
Text
12.03.2019
SIEMENS CERT
SSA-203306 (Last Update: 2019-03-12): Password Vulnerabilities in SIPROTEC 4 and SIPROTEC Compact Relay Families
Titel
SSA-203306 (Last Update: 2019-03-12): Password Vulnerabilities in SIPROTEC 4 and SIPROTEC Compact Relay Families
Veröffentlicht
12. März 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-203306.pdf
Text
SIPROTEC 4 and SIPROTEC Compact devices could allow access authorization passwords to be reconstructed or overwritten via engineering mechanisms that involve DIGSI 4 and EN100 Ethernet communication modules. Siemens has released updates for several affected products, and recommends specific countermeasures for the remaining products.
12.03.2019
SIEMENS CERT
SSA-584286 (Last Update: 2019-03-12): Denial-of-Service Vulnerability in SIMATIC S7-1200 CPU and SIMATIC S7-1500 CPU
Titel
SSA-584286 (Last Update: 2019-03-12): Denial-of-Service Vulnerability in SIMATIC S7-1200 CPU and SIMATIC S7-1500 CPU
Veröffentlicht
12. März 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-584286.pdf
Text
A vulnerability was identified in SIMATIC S7-1200 and S7-1500 CPUs that could allow an attacker to cause a denial-of-service condition preventing HMI or engineering access to the PLC over port 102/tcp. Siemens has released an update for the S7-1500 product and recommends that customers update to the new version. Siemens ...
12.03.2019
SIEMENS CERT
SSA-254686 (Last Update: 2019-03-12): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products
Titel
SSA-254686 (Last Update: 2019-03-12): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products
Veröffentlicht
12. März 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-254686.pdf
Text
Security researchers published information on vulnerabilities known as Foreshadow and L1 Terminal Fault (L1TF). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Siemens Industrial Products contain processors that are affected by the vulnerabilities.
Februar 2019
25.02.2019
SIEMENS CERT
SSA-844562 (Last Update: 2019-02-25): Multiple Vulnerabilities in Licensing Software for WinCC OA
Titel
SSA-844562 (Last Update: 2019-02-25): Multiple Vulnerabilities in Licensing Software for WinCC OA
Veröffentlicht
25. Februar 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-844562.pdf
Text
Multiple vulnerabilities have been identified in the WibuKey Digital Rights Management (DRM) solution, which affect WinCC OA. Siemens recommends users to apply the updates to WibuKey Digital Rights Management (DRM) provided by WIBU SYSTEMS AG.
12.02.2019
SIEMENS CERT
SSA-760124 (Last Update: 2019-02-12): Multiple Vulnerabilities in Licensing Software for SICAM 230
Titel
SSA-760124 (Last Update: 2019-02-12): Multiple Vulnerabilities in Licensing Software for SICAM 230
Veröffentlicht
12. Februar 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-760124.pdf
Text
Multiple vulnerabilities have been identified in the WibuKey Digital Rights Management (DRM) solution, which affect the SICAM 230 process control system. Siemens recommends users to apply the updates to WibuKey Digital Rights Management (DRM) provided by WIBU SYSTEMS AG.
12.02.2019
SIEMENS CERT
SSA-346262 (Last Update: 2019-02-12): Denial-of-Service in Industrial Products
Titel
SSA-346262 (Last Update: 2019-02-12): Denial-of-Service in Industrial Products
Veröffentlicht
12. Februar 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-346262.pdf
Text
Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...
12.02.2019
SIEMENS CERT
SSA-505225 (Last Update: 2019-02-12): Spectre Vulnerabilities in SIMATIC Industrial Thin Client V3
Titel
SSA-505225 (Last Update: 2019-02-12): Spectre Vulnerabilities in SIMATIC Industrial Thin Client V3
Veröffentlicht
12. Februar 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-505225.pdf
Text
SIMATIC Industrial Thin Clients V3 contain a processor which is affected by vulnerabilities known under the name Spectre V1 and Spectre V4. Siemens has released updates for the affected products and recommends to update to the latest version.
12.02.2019
SIEMENS CERT
SSA-254686 (Last Update: 2019-02-12): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products
Titel
SSA-254686 (Last Update: 2019-02-12): Foreshadow / L1 Terminal Fault Vulnerabilities in Industrial Products
Veröffentlicht
12. Februar 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-254686.pdf
Text
Security researchers published information on vulnerabilities known as Foreshadow and L1 Terminal Fault (L1TF). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Siemens Industrial Products contain processors that are affected by the vulnerabilities.
12.02.2019
SIEMENS CERT
SSA-179516 (Last Update: 2019-02-12): OpenSSL Vulnerability in Industrial Products
Titel
SSA-179516 (Last Update: 2019-02-12): OpenSSL Vulnerability in Industrial Products
Veröffentlicht
12. Februar 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-179516.pdf
Text
A vulnerability in OpenSSL affects several Siemens industrial products. Siemens has released updates for some affected products and is working on updates for others.
12.02.2019
SIEMENS CERT
SSA-268644 (Last Update: 2019-02-12): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products
Titel
SSA-268644 (Last Update: 2019-02-12): Spectre-NG (Variants 3a and 4) Vulnerabilities in Industrial Products
Veröffentlicht
12. Februar 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-268644.pdf
Text
Security researchers published information on vulnerabilities known as Spectre-NG (Variants 3a and 4). These vulnerabilities affect many modern processors from different vendors to a varying degree. Several Industrial Products include affected processors and are affected by the vulnerabilities.
12.02.2019
SIEMENS CERT
SSA-377318 (Last Update: 2019-02-12): Multiple vulnerabilities in Intel Active Management Technology (AMT) of SIMATIC IPCs
Titel
SSA-377318 (Last Update: 2019-02-12): Multiple vulnerabilities in Intel Active Management Technology (AMT) of SIMATIC IPCs
Veröffentlicht
12. Februar 2019 01:00
URL
https://cert-portal.siemens.com/productcert/pdf/ssa-377318.pdf
Text
There are multiple vulnerabilities in the Intel Management Engine used in multiple SIMATIC IPC devices that may allow arbitrary code execution, a partial denial of service or information disclosure. For additional information see: https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00141.html. Siemens provides updates for the affected devices.

Letzte Updates

BOSCH PSIRT
19.07.2024
SIEMENS CERT
22.07.2024
US CERT
24.07.2024
US CERT (ICS)
25.07.2024

Nach Quelle

Archiv

2024
2023
2022
2021
2020
2019
2018
2017

Feeds