January 2019
Title
Schneider Electric Zelio Soft 2
Published
Jan. 8, 2019, 4:05 p.m.
Summary
This advisory provides mitigation recommendations for a use after free vulnerability in Schneider Electric's Zelio Soft 2 programming platform.
Title
Schneider Electric IIoT Monitor (Update A)
Published
Jan. 8, 2019, 4 p.m.
Summary
This updated advisory is a follow-up to the original advisory titled ICSA-19-008-02 Schneider Electric IIoT Monitor that was published January 08, 2019, on the NCCIC/ICS-CERT website. This updated advisory includes mitigations for path traversal, unrestricted upload of file with dangerous type, and XXE vulnerabilities in the Schneider Electric IIoT Monitor ...
Title
Schneider Electric IIoT Monitor
Published
Jan. 8, 2019, 4 p.m.
Summary
This advisory includes mitigations for path traversal, unrestricted upload of file with dangerous type, and XXE vulnerabilities in the Schneider Electric IIoT Monitor software.
Title
SSA-181018 (Last Update: 2019-01-08): Heap Overflow Vulnerability in SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C
Published
Jan. 8, 2019, 1 a.m.
Summary
SCALANCE X switches, RUGGEDCOM WiMAX, RFID 181-EIP, and SIMATIC RF182C are affected by a vulnerability that could allow an unprivileged attacker located in the same local network segment (OSI Layer 2) to gain system privileges by sending a specially crafted DHCP response to a client's DHCP request. Siemens has released ...
Title
SSA-535640 (Last Update: 2019-01-08): Vulnerability in Industrial Products
Published
Jan. 8, 2019, 1 a.m.
Summary
Various industrial products use the Discovery Service of the OPC UA protocol stack by the OPC foundation https://github.com/OPCFoundation/UA-.NETStandard and could therefore be affected by the remote resource consumption attacks (CVE-2017-12069).
Title
SSA-293562 (Last Update: 2019-01-08): Vulnerabilities in Industrial Products
Published
Jan. 8, 2019, 1 a.m.
Summary
Several industrial devices are affected by two vulnerabilities that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. The precondition for this scenario is a direct layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released updates ...
Title
SSA-346262 (Last Update: 2019-01-08): Denial-of-Service in Industrial Products
Published
Jan. 8, 2019, 1 a.m.
Summary
Several industrial products are affected by a vulnerability that could allow remote attackers to conduct a Denial-of-Service (DoS) attack by sending specially crafted packets to port 161/udp (SNMP). Siemens has released updates for several affected products, and recommends that customers update to the new version. Siemens is preparing further updates ...
Title
SSB-439005 (Last Update: 2019-01-08): Vulnerabilities in the additional GNU/Linux subsystem of the SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP
Published
Jan. 8, 2019, 1 a.m.
Summary
Title
SSA-348629 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC Software
Published
Jan. 8, 2019, 1 a.m.
Summary
A Denial-of-Service vulnerability has been identified in SIMATIC PCS 7, SIMATIC WinCC, SIMATIC WinCC Runtime Professional and SIMATIC NET PC-Software. Siemens has released updates for several affected products and recommends that customers update to the new version. Siemens is preparing further updates and recommends specific countermeasures until patches are available.
Title
SSA-559174 (Last Update: 2019-01-08): Multiple Vulnerabilities in CP1604 and CP1616 devices
Published
Jan. 8, 2019, 1 a.m.
Summary
Multiple vulnerabilities have been identified in SIEMENS CP1604 and CP1616 devices. The most severe of these vulnerabilities could allow an attacker to extract internal communication data or cause a Denial-of-Service condition.
Title
SSA-592007 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in Industrial Products
Published
Jan. 8, 2019, 1 a.m.
Summary
Several industrial controllers are affected by a security vulnerability that could allow an attacker to cause a Denial-of-Service condition via PROFINET DCP network packets under certain circumstances. Precondition for this scenario is a direct OSI Layer 2 access to the affected products. PROFIBUS interfaces are not affected. Siemens has released ...
Title
SSA-579309 (Last Update: 2019-01-08): Denial-of-Service in SICAM A8000 Series
Published
Jan. 8, 2019, 1 a.m.
Summary
The SICAM A8000 RTU series is affected by a security vulnerability that could allow unauthenticated remote users to cause a Denial-of-Service (DoS) condition of the web server of affected products. Siemens has released updates for all product variants and recommends that customers update to the new versions.
Title
SSA-180635 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in S7-1500 CPU
Published
Jan. 8, 2019, 1 a.m.
Summary
Older versions of the S7-1500 CPU are affected by two Denial-of-Service vulnerabilities. Siemens has released updates for the currently supported hardware versions.
Title
SSA-325546 (Last Update: 2019-01-08): Denial-of-Service Vulnerabilities in EN100 Ethernet Communication Module of SWT3000
Published
Jan. 8, 2019, 1 a.m.
Summary
The firmware variant IEC 61850 of the EN100 Ethernet communication module for SWT 3000 is affected by security vulnerabilities which could allow an attacker to conduct a Denial-of-Service attack over the network. Siemens has released updates for several affected products, is working on updates for the remaining affected products, and ...
Title
SSA-306710 (Last Update: 2019-01-08): Denial-of-Service Vulnerability in SIMATIC S7-300 CPU
Published
Jan. 8, 2019, 1 a.m.
Summary
Siemens has released a firmware update for the SIMATIC S7-300 CPU family which fixes a vulnerability that could allow remote attackers to perform a Denial-of-Service attack.
Title
Schneider Electric Pro-face GP-Pro EX
Published
Jan. 3, 2019, 4:10 p.m.
Summary
This advisory provides mitigation recommendations for an improper input validation vulnerability in Schneider Electric's Pro-face GP-Pro EX, an HMI screen editor and logic programming software.
Title
Yokogawa Vnet/IP Open Communication Driver
Published
Jan. 3, 2019, 4:05 p.m.
Summary
This advisory provides mitigation recommendations for a resource management error vulnerability in Yokogawa's Vnet/IP open communication driver.
Title
Hetronic Nova-M
Published
Jan. 3, 2019, 4 p.m.
Summary
This advisory provides mitigation recommendations for an authentication bypass by capture-relay vulnerability in Hetronic's Nova-M remote control transmitters and receivers.
December 2018
Title
Horner Automation Cscape
Published
Dec. 20, 2018, 4:10 p.m.
Summary
This advisory provides mitigation recommendations for an improper input validation vulnerability in Horner Automation’s Cscape, a Control System Application programming software.
Title
Schneider Electric EcoStruxure
Published
Dec. 20, 2018, 4:05 p.m.
Summary
This advisory provides mitigation recommendations for an open redirect vulnerability in Schneider Electric’s EcoStruxure, an IoT-enabled architecture and platform.
Title
Rockwell Automation FactoryTalk Services Platform
Published
Dec. 20, 2018, 4 p.m.
Summary
This advisory was originally posted to the HSIN ICS-CERT library on November 27, 2018, and is being released to the NCCIC/ICS-CERT website. This advisory provides mitigation recommendations for a heap-based buffer overflow vulnerability in the Rockwell Automation FactoryTalk Services Platform.
Title
ABB GATE-E2
Published
Dec. 18, 2018, 4:30 p.m.
Summary
This advisory provides mitigation recommendations for missing authentication for critical function and cross-site scripting vulnerabilities in ABB's GATE-E2 ethernet devices.
Title
3S-Smart Software Solutions GmbH CODESYS Control V3 Products
Published
Dec. 18, 2018, 4:20 p.m.
Summary
This advisory provides mitigation recommendations for an improper access control vulnerability identified in the 3S-Smart Software Solutions CODESYS Control V3 products.
Title
3S-Smart Software Solutions GmbH CODESYS V3 Products
Published
Dec. 18, 2018, 4:15 p.m.
Summary
This advisory provides mitigation recommendations for use of insufficiently random values and improper restriction of communication channel to intended endpoints vulnerabilities identified in the 3S-Smart Software Solutions GmbH CODESYS V3 products.
Title
Siemens TIM 1531 IRC Modules
Published
Dec. 18, 2018, 4:10 p.m.
Summary
This advisory provides mitigation recommendations for a missing authentication for critical function vulnerability in Siemens' TIM 1531 IRC modules.

Last Updates

BOSCH PSIRT
15.05.2024
SIEMENS CERT
14.05.2024
US CERT
10.05.2024
US CERT (ICS)
23.05.2024

By Source

Archive

2024
2023
2022
2021
2020
2019
2018
2017

Feeds